ABSTRACT
This
project report is based on fabrication of twin leaf metal door. A mental door
is a movable structure used to close off an entrance typically consisting
of a panel that swings on lings, side or
rotate.
This metal door more reliable and
strong and has much good looking appearance than other doors like, wooden door, glass door, leather door e.t.c various
fabrication processes such as: marking out, cutting, bending, joining or
welding, grinding, spraying e.t.c were adopted and implemented in the fabrication
of this twin leaf metal door. Peep hole was fixed on the door to screw visitor
and admit on choice, the main purpose is to ensure safety and protection.
The material used to make this protect
to be well strong design are as follows-galvanised metal plate, square pipe
lock set key paint, hinges, guage 12 electrode and grinding disk and the major
reason of using the material is to provide good making features of the door
which will meet up with nowadays demand and designs, and in order to expose students
to how to use different types of simple tools and some machines. The special
features on the door are as follows: pin hole glass, lock set key, hinges
small, square pipe design, glass paint use to coat the door for rusting.
TABLE
OF CONTENT
Title
page
Certification
Dedication
Acknowledgement
Abstract
Table
of content
List
of figure
Nomenclature
CHAPTER
ONE
Introduction
1.1 Background of the study
1.2 Literature review
1.3 Aim
1.4 Objectives of the project
CHAPTER
TWO
ANALYSIS
OF ALTERNATIVE METHOD AND CHOICE OF BEST ALTERNATIVE.
2.1 Definition of door
2.2 Types of door
2.3.1 Advantage of metal door opening
2.3.2 Advantage of metal door closure
2.4 Definition of welding
2.5 Types of welding
5.4 Welding operation
5.5 Types of welding operation
5.6 Safety operation
5.7.1 Welding equipment
5.7.2 Electrode Holder
5.8 Precautionary measures against other Risks
5.9 Finishing Touches
5.10 Maintenance
5.11 Problem Encountered
5.12 Bills of Engineering measurement and Evaluation
CHAPTER
SIX
CONCLUSION
AND RECOMMENDATION
6.1 Conclusion
6.2 Recommendation
References
CHAPTER ONE
1.1 BACKGROUND
OF THE STUDY
Many
years ago, different types of door were in use which includes doors were either
by wood or grass. These doors were made then to meet the purpose of security
both life and property. It was later discovered that doors made with wood do
not last long.
They have a short life span. More so,
they are not durable they go demanded very easily and quickly and they cannot
with stand high degree of strain.
Doors made with wood are very risky to
be put at open place, this is because doors made with wood when faced with
water frequently. It get demand. In addition, termites could make the life span
of wooden short.
Also, considering the rate of which
armed robber break into house in our society, one would agree. That wooden door
gave then the to do so because, it could easily be damaged.
Meanwhile,
based on the informational realms and also the urged to improve
technologically, so as technologist in training, we have of come up with a
design to serve as an alternative mean of making doors of different patterns of
today. The pattern that seem to give doors a long of man and properties.
1.2 LITERATURE REVIEW
Many
years ago, doors were made with either wood or grasses the general purpose of
serves as a mean of secreting both lives and properties and also serve as a
feature of any building.
When
open, they admit ventilation and light. Doors used to control the physical
atmosphere within a space by enclosing the air draft, so that interiors may be
more effectively heated or cooled. Door are significant in preventing the
spread of fire they are also as barrier for esthetic, keeping formal and
utility area separates. Door are usually different in most places, due to
chance of temperature and humidity, doors usually have to be framed. The Greeks
and Romans used many styles of doors single, double sliding of folding the
doors as well as many other found throughout Europe’s past were made of brome.
This seemed to be going material used and purpose of doors.
1.3 AIMS AND OBJECTIVES
1. To over come the problem of short life
span of doors
2. To
reduce the risk of human life and properties cause by wooden and grass door
during burglary.
3. To
change the local method of door design to the modern method e.g wooden door to
metal door
4.
To allow student to be more expose to use of some complex machine in the
workshop and basic workshop procedure
5.
To beautify the building
6.
To produce decent, stronger and well designed types of door by using
metal.
7
To practical’s the theoretical work done in the lecture room.
Click “DOWNLOAD NOW” below to get the complete Projects
FOR QUICK HELP CHAT WITH US NOW!
+(234) 0814 780 1594
Buyers has the right to create
dispute within seven (7) days of purchase for 100% refund request when
you experience issue with the file received.
Dispute can only be created when
you receive a corrupt file, a wrong file or irregularities in the table of
contents and content of the file you received.
ProjectShelve.com shall either
provide the appropriate file within 48hrs or
send refund excluding your bank transaction charges. Term and
Conditions are applied.
Buyers are expected to confirm
that the material you are paying for is available on our website
ProjectShelve.com and you have selected the right material, you have also gone
through the preliminary pages and it interests you before payment. DO NOT MAKE
BANK PAYMENT IF YOUR TOPIC IS NOT ON THE WEBSITE.
In case of payment for a
material not available on ProjectShelve.com, the management of
ProjectShelve.com has the right to keep your money until you send a topic that
is available on our website within 48 hours.
You cannot change topic after
receiving material of the topic you ordered and paid for.
Login To Comment