ABSTRACT
The
term commercial bank is the type of financial institution or intermediary and
the bank that lends money, provide transaction and saving, accepts deposit on
behalf of their customers. The study is being carried out to investigate impact
of commercial banking on manufacturing sector in Nigeria taken Skye Bank of Nigeria
Plc, as a case of study. it examines the
credit facilities rendered by commercial bank to manufacturing
industries, it also highlight the problem hindering commercial bank on
manufacturing sector with suggested
possible solution. Sample survey design has been used for the research
work in order to gain insight into a situation that is not very clear and that
has been seriously investigated. Therefore, questionnaire as a research
instrument for primary data collection and review of related literature were
been used to collect both primary and secondary data respectively. Finding in
this work shows that commercial bank lending to manufacturing sector has not
been encouraging over the years until 1987, when the CBN started to impose
sanction on commercial banks. This study recommend that capital base of
commercial bank should be increased which will lead to increase rate of
performance placed on manufacturing industries and government should constitute
law enforcement agent to monitor the activities of manufacturing industry to
ensure that money obtained from commercial bank are been used judiciously. In
conclusion, commercial bank is playing a vital role on manufacturing sector in Nigeria
and economy as a whole.
TABLE
OF CONTENTS
TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER
ONE: INTRODUCTION
1.1
BACKGROUND
TO THE STUDY
1.2
STATEMENT
OF THE PROBLEM
1.3
PURPOSE
OF THE STUDY
1.4
STATEMENT
OF RESEARCH HYPOTHESES
1.5
SIGNIFICANCE
OF THE STUDY
1.6
SCOPE
OF THE STUDY
1.7
LIMITATIONS
OF THE STUDY
1.8
DEFINITION
OF THE TERMS
CHAPTER
TWO: LITERATURE REVIEW
2.1
INTRODUCTION
2.2
ORIGIN
OF COMMERCIAL BANK IN NIGERIA
2.3
FUNCTION
AND SERVICES RENDERED BY BANK
2.4
FINANCING
MANUFACTURING BUSINESS IN NIGERIA
2.5
ROLE
OF COMMERCIAL BANK IN INDUSTRIAL SECTOR
2.6
PRODUCTS
AND SERVICES DELIVERABLE BY BANK OF INDUSTRY
2.7
LEGISLATION
AND CONTROL OF COMMERCIAL BANK
(THE NEED FOR REGULATION)
CHAPTER
THREE; RESEARCH METHODOLOGY
3.1
INTRODUCTION
TO THE CHAPTER
3.2
RESTATEMENT
OF THE RESEARCH HYPOTHESES
3.3
RESEARCH
DESIGN
3.4
DESCRIPTION
OF THE STUDY POPULATION
3.5
SAMPLING
DESIGN AND PROCEDURE
3.6
DATA
COLLECTION INSTRUMENT
3.7
TEST
OF VALIDITY
3.8
PROCEDURE
FOR DATA ANALYSIS
CHAPTER
FOUR: DATA PRESENTATION AND ANALYSIS
4.1
BRIEF
DISCUSSION OF STUDY AREA
4.2
DISCUSSION
OF RESPONDENTS DEMOGRAPHIC CHARACTERISTIC
4.3
PRESENTATION
AND ANALYSIS OF DATA ON RESEARCH QUESTIONS
4.4
INTERPRETATION
OF FINDINGS
CHAPTER
FIVE: CONCLUSION AND RECOMMENDATION
5.1
SUMMARY
OF THE FINDING
5.2
CONCLUSION
5.3
RECOMMENDATIONS
5.4
SUGGESTIONS
FOR FURTHER STUDIES
APPENDIX 1
APPENDIX 11
REFERENCE
CHAPTER
ONE: INTRODUCTION
1.1
BACKGROUND OF THE STUDY
The growth of economy and development of banking have often
appeared inseparable until l7 century, there had existed on modern banking
institution anywhere, and there had on modern developed economy. Before 1892,
Nigeria was evidently underdeveloped economically, even in 1975, however,
despite the growth in the number of banks Nigeria is still developing it is
true that the number of bank should not be the only or even the major aspect of
banking development have been taken account, it would still not be correct to
imply mono casual relationship between the development of commercial bank and
the growth of a modern economy.
So many factors determine the level and the rate of
development of an economy .the natural resources endowment, labour supply and
capital Are economy blessed with precious minerals, valuable agricultural crops
and a suitable land water mix, is in a better position to develop than another
economy with out these, other things being equal. In the same manner a country
that does not have adequate supply of requisite manpower is at advantages. this
is why most countries put a premium on manpower development, the justification
for this phases has been succinctly put by Harbinsan, in-deed if a country is
unable to develop its human resources, it cant build anything also, where there
is modern political system, a sense of national unity or a prosperous modern
economy we need not to add anything also.
Capital is another critical factor required in the process
of development .the term of capital however requires some elucidation. At
times, the term capital is used to refer to man made physical facilities that
aid further production of good and services, machinery and equipment are such
facilities, otherwise called real capital they are produced to serve he needs
of further production and not serve the needs of immediate consumption such
good imply the existence of some surplus over and above the requirements for
consumption purpose.
Financial capital commutes also an ideal of surplus the
saving that that result from society income that have not been spent on
procuring good for consumption go make up the financial capital . Financial
capital is required to procure the real capital it is the concern for the
provision of financial capital market, the development of a capital market a
consideration in an economy commercial banks happen to be a subset of these
institution that makes up the capital market
1.2 STATEMENT OF THE PROBLEM
The problems in line with the impact of commercial bank on
manufacturing sector are as follows point
1 The need to increase supply
capital which was based on the level of guarantee.
2 The bulk of the product of
subsistence level and therefore usually generate
small surplus out of which little saving for investment could be made
3 The inability of small and
medium scale industries in obtaining loan as a
result of requirement
4 The scale of expansion and
the adoption of innovation to increase capital
requirement.
1.3 PURPOSE OF THE STUDY
The overall objective is to know the role of commercial
bank in manufacturing sector in Nigeria.
However, the specific purposes are as follows
1.
To know the effects of modern banking
credit facilities on manufacturing industries.
2.
To assess the roles of government fiscal
policy in manufacturing bank over the period 1980-1995.
3.
To highlight the problems hindering
commercial bank of manufacturing and suggest possible solution.
4.
Commercial bank seeks to develop an
empirical model of regulators failure decision process of manufacturing sector
1.4
STATEMENT OF RESEARCH HYPOTHESIS
The research question will identify the area where the phenomenon
to be studied.
1. Does commercial bank has any role to play on manufacturing industries?
2. Is manufacturing sector has ability to raise loam from bank?
Hypothesis
1
HO:
There is no
significant relationship between commercial banking and manufacturing sector.
HI: There is significant
relationship between commercial banking and manufacturing sector.
Hypothesis
II
HOi
There is no
significant relationship between manufacturing sector and ability to raise loan
from the bank
HOii There is significant
relationship between manufacturing sector and ability to raise loan from the
bank.
1.5
SIGNIFICANCE OF THE STUDY
The study will be important to
the banking industry and manufacturing sector for the benefit of the nation
economy in the following areas:
1. It will offer recommendation on way of achieving and enhance productivity in the banking industry
by provision of credit to both small, medium and large scale farmer and
industries.
2. it will enable the manufacturing sector to performing well
in there productivity for the benefit of
a nation by provision of technical and necessary advise through the commercial
bank.
3. Also. It will be a useful addition to the literature on proper planning in the
manufacturing industry.
1.6 SCOPE OF THE STUDY
The study focuses on the role of commercial bank on manufacturing
sector and management, trained staff and senior staff members of Skye Bank Plc.
As respondents. While Skye bank maintain an interlinked branch network of over
two hundred and sixty (260) in all part of Nigeria
which her headquarter at 3 Akin
Adesola Street Victoria
Island Lagos, Nigeria.
1.6
LIMITATION OF THE STUDY
Based on the topic of this project is to identify the impact
of commercial bank in manufacturing sector in Nigeria .there are some factors
which has been restricted the researcher to reach to the grassroots of the
project. The following are the limitation confronted during the project work:
1. Transportation
2. Time limitation
3. Inadequate financial research
1.8
DEFINITION OF TERMS
The following are the terms used in this project work:
COMMERCIAL
BANK:- Ibitoye
T.A and O.A Ajayi (2001) Is a type of financial institution and intermediary.
It is a bank that lends money and provides transaction, savings, money market
account and that accepts the deposit on behalf of their customer.
LOAN :- Donald P. (2007) An arrangement in which a lender gives money
or property to a borrower and the borrower agrees to return the property
or repay the money usually along with
interest at some future points in time.
FINANCE: Mercy Maranga (2009) Is the
study of how investors allocate their asserts over a time under condition of
certainty and uncertainty.
INTEREST:- Somoye (2010). It is a free
paid by a borrower of assets to the owner as a form of compensation for the uses
assets.
Login To Comment